HP BMD00022 Private Vlan configuration, Command /cfg/l2/vlan x/privlan, Tagpvl enabledisable, Map

Table 123 Protocol VLAN Configuration Menu options
Command	Description
prio <0-7>	Configures the priority value for this PVLAN.
add	Adds a port to the selected PVLAN.
rem	Removes a port from the selected PVLAN.
ports	Defines a list of ports that belong to the selected protocol on this VLAN.
	Enter 0 (zero) to remove all ports.
tagpvl enabledisable	Enables or disables port tagging on this PVLAN.
taglist	Defines a list of ports that will be tagged by the selected protocol on this
	VLAN. Enter empty to disable tagging on all ports by this PVLAN.
ena	Enables the selected protocol on the VLAN.
dis	Disables the selected protocol on the VLAN.
del	Deletes the selected protocol configuration from the VLAN.
cur	Displays the current configuration for this Protocol VLAN.

Private VLAN configuration

Command: /cfg/l2/vlan x/privlan

[privlan Menu]
type	- Set Private-VLAN type
map	- Associate secondary VLAN with a primary VLAN
ena	- Enable Private-VLAN
dis	- Disable Private-VLAN
cur	- Display current Private-VLAN configuration

The following table describes the Private VLAN Configuration Menu options.

Table 124 Private VLAN Configuration Menu options

Command	Description
type primaryisolatedcommunity	Defines the VLAN type, as follows:
	• Primary: A Private VLAN must have only one primary VLAN.
	The primary VLAN carries unidirectional traffic to ports on the
	isolated VLAN or to community VLAN.
	• Isolated: The isolated VLAN carries unidirectional traffic from
	host ports. A Private VLAN may have only one isolated VLAN.
	• Community: Community VLANs carry upstream traffic from
	host ports. A Private VLAN may have multiple community
	VLANs.
map <2-4094>	Configures Private VLAN mapping between a secondary VLAN
	(isolated or community) and a primary VLAN. Enter the
	primary VLAN ID.
ena	Enables the Private VLAN.
	Configuration Menu 154