HP BMD00022 Igmp static multicast router configuration, Igmp filtering configuration, Filter

IGMP static multicast router configuration

Command: /cfg/l3/igmp/mrouter [Static Multicast Router Menu]

add - Add port as Multicast Router Port rem - Remove port as Multicast Router Port

cur - Display current Multicast Router configuration

The following table describes the Static Multicast Router Configuration Menu options.

NOTE: When you configure a static multicast router on a VLAN, the process of learning multicast routers is disabled for that VLAN.

Table 153 IGMP Static Multicast Router Menu

Command	Description
add <port number> <1-4094><1-3>	Selects a port/VLAN combination on which the static
	multicast router is connected, and configures the IGMP
	version (1, 2, or 3) of the multicast router.
remove <port number> <1-4094>	Removes a static multicast router from the selected
	port/VLAN combination.
cur	Displays the current IGMP Static Multicast Router
	parameters.

IGMP filtering configuration

Command: /cfg/l3/igmp/igmpflt [IGMP Filter Menu]

filter - IGMP Filter Definition Menu port - IGMP Filtering Port Menu ena - Enable IGMP Filtering

dis - Disable IGMP Filtering

cur - Display current IGMP Filtering configuration

The following table describes the IGMP Filter Configuration Menu options.

Table 154 IGMP Filtering Menu options

Command	Description
filter <1-16>	Displays the IGMP Filter Definition Menu.
port <port number>	Displays the IGMP Filtering Port Menu.
ena	Enables IGMP filtering globally.
dis	Disables IGMP Filtering globally.
cur	Displays the current IGMP Filtering parameters.

Configuration Menu 178