HP BMD00022 manual ACL Re-mark In-Profile configuration, Command /cfg/acl/acl 1-384/re-mark/inprof

ACL Re-mark In-Profile configuration

Command: /cfg/acl/acl <1-384>/re-mark/inprof

[Re-marking - In Profile			Menu]
up1p	- Set Update User Priority Menu
updscp	- Set the update DSCP
reset	-	Reset in	profile settings
cur	-	Display current settings

Table 177 ACL Re-mark In-Profile Configuration Menu options
Command	Description
up1p	Displays the Re-Mark In-Profile Update User Priority Menu.
updscp <0-63>	Sets the DiffServ Code Point (DSCP) of In-Profile packets to the selected
	value.
reset	Resets the update DSCP parameters to their default values.
cur	Displays the current ACL re-mark in-profile parameters.

ACL Re-mark In-Profile Update User Priority configuration

Command: /cfg/acl/acl <1-384>/re-mark/inprof/up1p

	[Update User Priority Menu]
	value	- Set the update user priority
	utosp	- Enable/Disable use of TOS precedence
	reset	- Reset in profile up1p settings
	cur	- Display current settings
Table 178 ACL Update User Priority Configuration Menu options
Command		Description
value <0-7>		Defines 802.1p value. The value is the priority bits information in the packet
		structure.
utosp enabledisable		Enable or disable mapping of TOS (Type of Service) priority to 802.1p priority
		for In-Profile packets. When enabled, the TOS value is used to set the 802.1p
		value.
reset		Resets UP1P settings to their default values.
cur		Displays the current ACL Update User Priority parameters.

Configuration Menu 196