HP BMD00022 Port-based port mirroring, Command /cfg/pmirr/monport port number, Rem mirrored port

Port-based port mirroring

Command: /cfg/pmirr/monport <port number>

[Port 1 Menu]
add	- Add "Mirrored" port
rem	- Rem "Mirrored" port
delete	-	Delete this “Monitor” port
cur	-	Display current Port-based Port Mirroring configuration

The following table describes the port-based Port Mirroring Configuration Menu options.

Table 187 Port Mirroring Configuration Menu options

Command	Description
add <mirrored port> inoutboth	Adds the port to be mirrored. This command also allows you to
	enter the direction of the traffic. It is necessary to specify the
	direction because:
	• If the source port of the frame matches the mirrored port and
	the mirrored direction is ingress or both (ingress and egress),
	the frame is sent to the mirrored port.
	• If the destination port of the frame matches the mirrored port
	and the mirrored direction is egress or both, the frame is sent
	to the monitoring port.
rem <mirrored port>	Removes the mirrored port.
delete	Deletes this monitored port.
cur	Displays the current settings of the monitoring port.

Configuration Menu 203