HP BMD00022 manual Remote Monitoring configuration, Rmon history configuration, Command /cfg/rmon

Remote Monitoring configuration

Command: /cfg/rmon

[RMON Menu]
hist	- RMON History Menu
event	- RMON		Event Menu
alarm	-	RMON	Alarm Menu
cur	-	Display current RMON configuration

Remote Monitoring (RMON) allows you to monitor traffic flowing through the switch. The RMON MIB is described in RFC 1757.

The following table describes the RMON Configuration Menu options.

Table 182	RMON Menu options
Command	Description
hist	Displays the RMON History Menu.
event	Displays the RMON Event Menu.
alarm	Displays the RMON Alarm Menu.
cur	Displays the current RMON configuration.

RMON history configuration

Command: /cfg/rmon/hist <1-65535>

[RMON History	1	Menu]
ifoid	- Set interface MIB object to monitor
rbnum	- Set the number of requested buckets
intrval	- Set polling interval
owner	- Set owner for the RMON group of statistics
delete	- Delete this history and restore defaults
cur	- Display current history configuration

The following table describes the RMON History Menu options.

Table 183 RMON History Menu options

Command	Description
ifoid <1-127 characters>	Configures the interface MIB Object Identifier. The IFOID must correspond
	to the standard interface OID, as follows:
	1.3.6.1.2.1.2.2.1.1.x
	where x is the ifIndex (1-16, 18-21)
	The interface OID can have a maximum of 127 characters.
rbnum <1-65535>	Configures the requested number of buckets, which is the number of
	discrete time intervals over which data is to be saved.
	The range is from 1 to 65535. The default is 30.
	The maximum number of buckets that can be granted is 50.
intrval <1-3600>	Configures the time interval over which the data is sampled for each
	bucket.
	The range is from 1 to 3600 seconds. The default value is 1800 seconds.
	Configuration Menu 199