HP BMD00022 Routing Information Protocol configuration, Command /cfg/l3/rip, Off Globally turn

Routing Information Protocol configuration

Command: /cfg/l3/rip

[Routing Information Protocol		Menu]
if	- RIP Interface	Menu
update	- Set update period in seconds
redist	- RIP Route Redistribute Menu
on	- Globally turn	RIP ON
off	- Globally turn	RIP OFF
current	- Display current RIP configuration

The RIP Menu is used for configuring Routing Information Protocol parameters. This option is turned off by default.

The following table describes the RIP Configuration Menu options.

Table 139 RIP Configuration Menu options

Command	Description
if <1-249>	Displays the RIP Interface menu.
update <1-120>	Configures the time interval for sending for RIP table updates, in seconds.
	The default value is 30 seconds.
redist	Displays the RIP Route Redistribute menu.
on	Globally turns RIP on.
off	Globally turns RIP off.
cur	Displays the current RIP configuration.

Configuration Menu 165