HP BMD00022 View-based Access Control Model configuration, Command /cfg/sys/ssnmp/snmpv3/access

Table 88 SNMPv3 View Configuration Menu options

Command	Description
del	Deletes the vacmViewTreeFamily group entry.
cur	Displays the current vacmViewTreeFamily configuration.

View-based Access Control Model configuration

Command: /cfg/sys/ssnmp/snmpv3/access

[SNMPv3 vacmAccess 1 Menu]

name	- Set group name
model	- Set security model
level	- Set minimum level of security
rview	- Set read view index
wview	- Set write view index
nview	- Set notify view index
del	- Delete vacmAccess entry
cur	- Display current vacmAccess configuration

The view-based Access Control Model defines a set of services that an application can use for checking access rights of the user. Access control is needed when the user has to process SNMP retrieval or modification request from an SNMP entity.

The following table describes the User Access Control Configuration Menu options.

Table 89 View-based Access Control Configuration Menu options

Command	Description
name <1-32 characters>	Defines the name of the group, up to a maximum of 32 characters.
model usmsnmpv1snmpv2	Selects the security model to be used.
level	Defines the minimum level of security required to gain access rights. The level
noAuthNoPrivauthNoPriv	noAuthNoPriv means that the SNMP message will be sent without
authPriv	authentication and without using a privacy protocol. The level authNoPriv
	means that the SNMP message will be sent with authentication but without
	using a privacy protocol. The authPriv means that the SNMP message will
	be sent both with authentication and using a privacy protocol.
rview <1-32 characters>	Defines a 32 character long read view name that allows you read access to
	a particular MIB view. If the value is empty or if there is no active MIB view
	having this value then no access is granted.
wview <1-32 characters>	Defines a 32 character long write view name that allows you write access to
	the MIB view. If the value is empty or if there is no active MIB view having
	this value then no access is granted.
nview <1-32 characters>	Defines a 32 character long notify view name that allows you notify access to
	the MIB view.
del	Deletes the View-based Access Control entry.
cur	Displays the View-based Access Control configuration.

Configuration Menu 123