HP BMD00022 manual ACL IP Version 4 Filter configuration, Command /cfg/acl/acl 1-384/ipv4

ACL IP Version 4 Filter configuration

Command: /cfg/acl/acl <1-384>/ipv4

[Filtering IPv4		Menu]
sip	-	Set to filter on source IP address
dip	-	Set to filter on destination IP address
proto	-	Set to filter on protocol
tos	-	Set to filter on TOS
reset	-	Reset all fields
cur	-	Display current parameters

This menu allows you to define IPv4 matching criteria for an ACL. The following table describes the IP version 4 Filter Configuration Menu options.

Table 173 IPv4 Filter Configuration Menu options

Command	Description
sip <IP address> <IP mask>	Defines a source IP address for the ACL. If defined, traffic with this
	source IP address will match this ACL. Specify an IP address in dotted
	decimal notation. For example, 100.10.1.1.
dip <IP address> <IP mask>	Defines a destination IP address for the ACL. If defined, traffic with this
	destination IP address will match this ACL. For example, 100.10.1.2.
proto <0-255>	Defines an IP protocol for the ACL. If defined, traffic from the specified
	protocol matches this filter. Specify the protocol number. Some of the
	well-known protocols include:
	•	1—icmp
	•	2—igmp
	•	6—tcp
	•	17—udp
	•	89—ospf
	•	112—vrrp
tos <0-255>	Defines a Type of Service value for the ACL. For more information on
	ToS, see RFC 1340 and 1349.
reset	Resets the IPv4 parameters for the ACL to their default values.
cur	Displays the current IPV4 parameters.

Configuration Menu 193