HP BMD00022 manual Rmon alarm configuration, Command /cfg/rmon/alarm, Oid 1-127 characters

RMON alarm configuration

Command: /cfg/rmon/alarm <1-65535>

[RMON Alarm 1 Menu]

oid	- Set MIB oid datasource to monitor
intrval	- Set alarm interval
sample	- Set sample type
almtype	- Set startup alarm type
rlimit	- Set rising threshold
flimit	- Set falling threshold

revtidx - Set event index to fire			on rising threshold crossing
fevtidx	- Set event index to fire		on falling threshold crossing
owner	- Set owner for the alarm
delete	-	Delete this alarm and restore defaults
cur	-	Display current alarm configuration

The Alarm RMON group can track rising or falling values for a MIB object. The MIB object must be a counter, gauge, integer, or time interval. Each alarm index must correspond to an event index that triggers once the alarm threshold is crossed.

The following table describes the RMON Alarm Menu options.

Table 185 RMON Alarm Menu options

Command	Description
oid <1-127 characters>	Configures an alarm MIB Object Identifier.
	The alarm OID can have a maximum of 127 characters.
intrval <1-65535>	Configures the time interval over which data is sampled and
	compared with the rising and falling thresholds.
	The range is from 1 to 65535 seconds. The default is 1800
	seconds.
sample absdelta	Configures the method of sampling the selected variable and
	calculating the value to be compared against the thresholds,
	as follows:
	• abs—absolute value, the value of the selected variable is
	compared directly with the thresholds at the end of the
	sampling interval.
	• delta—delta value, the value of the selected variable at
	the last sample is subtracted from the current value, and
	the difference compared with the thresholds.
almtype risingfallingeither	Configures the alarm type as rising, falling, or either (rising
	or falling).
rlimit <-2147483647 to 2147483647>	Configures the rising threshold for the sampled statistic.
	When the current sampled value is greater than or equal to
	this threshold, and the value at the last sampling interval was
	less than this threshold, a single event is generated.
flimit <-2147483647 to 2147483647>	Configures the falling threshold for the sampled statistic.
	When the current sampled value is less than or equal to this
	threshold, and the value at the last sampling interval was
	greater than this threshold, a single event is generated.

Configuration Menu 201