HP BMD00022 manual SNMPv3 Target Address Table configuration, Command /cfg/sys/ssnmp/snmpv3/taddr

Table 91 SNMPv3 Community Table Configuration Menu options

Command	Description
tag <1-255 characters>	Configures a tag of up to 255 characters maximum. This tag specifies a set of
	transport endpoints to which a command responder application sends an
	SNMP trap.
del	Deletes the community table entry.
cur	Displays the community table configuration.

SNMPv3 Target Address Table configuration

Command: /cfg/sys/ssnmp/snmpv3/taddr

[SNMPv3 snmpTargetAddrTable 1 Menu]

name	- Set target address name
addr	- Set target transport address IP
port	- Set target transport address port
taglist	- Set tag list
pname	- Set targetParams name
del	- Delete targetAddrTable entry
cur	- Display current targetAddrTable configuration

This menu allows you to set passwords and display current user statistics. Passwords can be a maximum of 15 characters. To disable a user, set the password to null by simply pressing the Enter key when prompted for the password.

The following table describes the SNMPv3 Target Address Table Configuration Menu options.

Table 92 SNMPv3 Target Address Table Configuration Menu options

Command	Description
name <1-32 characters>	Configures the locally arbitrary, but unique identifier, target address
	name associated with this entry.
addr <transport address ip>	Configures a transport address IP that can be used in the generation
	of SNMP traps.
port <transport address port	Configures a transport address port that can be used in the
(1-65535)>	generation of SNMP traps.
taglist <1-255 characters>	Configures a list of tags (up to 255 characters maximum) that are
	used to select target addresses for a particular operation.
pname <1-32 characters>	Defines the name as defined in
	/cfg/sys/ssnmp/snmpv3/tparam/name.
del	Deletes the Target Address Table entry.
cur	Displays the current Target Address Table configuration.

Configuration Menu 125