HP BMD00022 manual Vrrp Tracking configuration, Command /cfg/l3/vrrp/track

Table 166 VRRP Interface Configuration Menu options

Command	Description
cur	Displays the current configuration for this IP interface’s authentication parameters.

VRRP Tracking configuration

Command: /cfg/l3/vrrp/track

[VRRP Tracking Menu]

vrs	- Set priority increment for virtual router tracking
ifs	- Set priority increment for IP interface tracking
ports	-	Set priority increment for VLAN switch	port tracking
cur	-	Display current VRRP Priority Tracking	configuration

This menu is used for setting weights for the various criteria used to modify priority levels during the master router election process. Each time one of the tracking criteria is met, the priority level for the virtual router is increased by an amount defined through this menu.

NOTE: These priority tracking options only define increment values. These options do not affect the VRRP master router election process until options under the VRRP Virtual Router Priority Tracking Menu are enabled.

The following table describes the VRRP Tracking Configuration Menu options.

Table 167 VRRP Tracking Configuration Menu options

Command	Description
vrs <0-254>	Defines the priority increment value (0 through 254) for virtual routers in master mode
	detected on this switch. The default value is 2.
ifs <0-254>	Defines the priority increment value (0 through 254) for active IP interfaces detected on
	this switch. The default value is 2.
ports <0-254>	Defines the priority increment value (0 through 254) for active ports on the virtual
	router’s VLAN. The default value is 2.
cur	Displays the current configuration of priority tracking increment values.

Configuration Menu 189