HP BMD00022 Open Shortest Path First configuration, Command /cfg/l3/ospf, Md5key 1-255 characters

Open Shortest Path First configuration

Command: /cfg/l3/ospf

[Open Shortest Path First Menu]
aindex	- OSPF Area (index) Menu
range	- OSPF Summary Range	Menu
if	- OSPF Interface Menu
virt	- OSPF Virtual Links	Menu
md5key	- OSPF MD5 Key Menu
host	- OSPF Host Entry Menu
redist	- OSPF Route Redistribute Menu
lsdb	- Set the LSDB limit	for external LSA
default	- Export default route information
on	- Globally turn OSPF	ON
off	- Globally turn OSPF	OFF
cur	- Display current OSPF configuration

The following table describes the Open Shortest Path First Menu options.

Table 142 OSPF Configuration Menu options

Command	Description
aindex <0-2>	Displays the area index menu. This area index does not represent
	the actual OSPF area number.
range <1-16>	Displays summary routes menu for up to 16 IP addresses.
if <1-249>	Displays the OSPF interface configuration menu.
virt <1-3>	Displays the Virtual Links menu used to configure OSPF for a Virtual
	Link.
md5key <1-255 characters>	Assigns a string to MD5 authentication key.
host <1-128>	Displays the menu for configuring OSPF for the host routes. Up to
	128 host routes can be configured. Host routes are used for
	advertising network device IP addresses to external networks to per-
	form server load balancing within OSPF. It also makes Area Border
	Route (ABR) load sharing and ABR failover possible.
redist <fixedstaticrip>	Displays Route Distribution Menu.
lsdb <0-2000>	Sets the link state database limit. Enter 0 (zero) for no limit.
default <1-16777214>none	Sets one default route among multiple choices in an area.
	Enter none for no default route.
on	Enables OSPF.
off	Disables OSPF.
cur	Displays the current OSPF configuration settings.

Configuration Menu 168