HP BMD00022 manual Command /cfg, Following table describes the Configuration Menu options

Configuration Menu

Introduction

The Configuration Menu is only available from an administrator login. It includes submenus for configuring every aspect of the switch. Changes to configuration are not active until explicitly applied. Changes can be saved to non-volatile memory (NVRAM).

Menu information

Command: /cfg

[Configuration Menu]

sys	- System-wide Parameter Menu
port	- Port Menu
l2	- Layer 2 Menu
l3	- Layer 3 Menu
qos	- QOS Menu
acl	- Access Control List Menu
rmon	- RMON Menu
pmirr	- Port Mirroring Menu
ufd	- Uplink Failure Detection Menu
sfd	- Server Link Failure Detection Menu
dump	- Dump current configuration to script file
ptcfg	- Backup current configuration to FTP/TFTP server
gtcfg	- Restore current configuration from FTP/TFTP server
cur	- Display current configuration

The following table describes the Configuration Menu options.

Table 78 Configuration Menu options

Command	Usage
sys	Displays the System Configuration Menu.
port <port number>	Displays the Port Configuration Menu.
l2	Displays the Layer 2 Configuration Menu.
l3	Displays the Layer 3 Configuration Menu.
qos	Displays the Quality of Service Configuration Menu.
acl	Displays the Access Control List Configuration Menu.
rmon	Displays the RMON Configuration Menu.
pmirr	Displays the Mirroring Configuration Menu.
ufd	Displays the Uplink Failure Detection Configuration Menu.
sfd	Displays the Server Link Failure Detection Configuration
	Menu.
dump	Dumps current configuration to a script file.
	Configuration Menu 108