HP BMD00022 manual Key key stringnone, Mdkey 1-255none

The following table describes the OSPF Interface Configuration Menu options.

Table 145 OSPF Interface Configuration Menu options

Command	Description
aindex <0-2>	Configures the OSPF area index.
prio <0-255>	Configures the assigned priority value to the OSPF interfaces.
	(A priority value of 255 is the highest and 1 is the lowest. A priority value of 0
	specifies that the interface cannot be used as Designated Router (DR) or Backup
	Designated Router (BDR).)
cost <1-65535>	Configures cost set for the selected path—preferred or backup. Usually the cost
	is inversely proportional to the bandwidth of the interface. Low cost indicates
	high bandwidth.
hello <1-65535>	Configures the interval in seconds between the hello packets for the interfaces.
dead <1-65535>	Configures the health parameters of a hello packet, which is set for an interval
	of seconds before declaring a silent router to be down.
trans <1-3600>	Configures the transit delay in seconds.
retra <1-3600>	Configures the retransmit interval in seconds.
key <key string>none	Sets the authentication key to clear the password.
mdkey <1-255>none	Assigns an MD5 key to the interface.
enable	Enables the OSPF interface.
disable	Disables the OSPF interface.
delete	Deletes the OSPF interface.
cur	Displays the current settings for OSPF interface.

Configuration Menu 171