HP BMD00022 manual Server Mobility configuration, Command /cfg/l3/sm, Addr2 IP address

The following table describes the BOOTP Configuration Menu options.

Table 158 BOOTP Configuration Menu options

Command	Description
addr <IP address>	Sets the IP address of the BOOTP server. For example, 100.10.1.1.
addr2 <IP address>	Sets the IP address of the secondary BOOTP server. For example,
	100.10.1.2.
on	Globally turns on BOOTP relay.
off	Globally turns on BOOTP relay.
cur	Displays the current BOOTP relay configuration.

Server Mobility configuration

Command: /cfg/l3/sm

[ServerMobility		Menu]
port	-	Server Mobility Port Menu
default	-	Set ServerMobility configuration to factory default
add	-	Add ServerMobility ports
rem	-	Remove ServerMobility ports
filter	-	Enable/Disable DHCP request message filters on ports
nsmrelay	-	Enable/Disable relay on non-ServerMobility ports
on	-	Globally turn ServerMobility ON
off	-	Globally turn ServerMobility OFF
cur	-	Display current ServerMobility configuration

The following table describes the Server Mobility Configuration menu options.

Table 159 Server Mobility Configuration menu options

Command	Description
port <port number>	Displays the Server Mobility port menu.
default	Resets the Server Mobility parameters to their factory default values.
add <port number>	Configures a port as a Server Mobility port.
rem <port number>	Removes the port from Server Mobility.
filter enabledisable	Enables or disables filtering DHCP request information on the port.
	When enabled, DHCP requests from the server are filtered, so that
	the DHCP server receives only DHCP requests from the
	HP 1:10 GbE switch.
nsmrelay enabledisable	Enables or disables BOOTP Relay for all ports that have Server
	Mobility disabled. The default value is disabled.
on	Globally turns Server Mobility on.
off	Globally turns Server Mobility off.
cur	Displays the current Server Mobility settings.
	Configuration Menu 181