Harman-Kardon AVR 355, AVR 255 owner manual Rear Panel Connections

Rear Panel Connections

	Z 7 S 5 9		X
0	Q P T Y B	a	8 L J e	Kg

1

32

b

6

c d f

W 4 V U D O			F AE N G R C H M I
￿ AM Antenna		￿ Surround Speaker Outputs		￿ Remote IR Output and Input
￿ FM Antenna		￿ Switched AC Accessory Outlet		Zone 2 IN
￿ Analog 2 Audio IN		￿ RS-232 Serial Port		! Preamp Outputs
￿ Analog 2 Audio OUT		￿ AC Power Cord		# HDMI Output
￿ Subwoofer Output		, Video 2 Component Video Inputs		" Video 3 Video Inputs
￿ Analog 5 Audio IN		￿ Component Video Outputs		$ Analog Audio 3 IN
￿ Analog 1 Audio IN		￿ Video 1 Component Video Inputs		% HDMI Inputs
￿ Analog 4 Audio OUT		￿ Download Mode Button		& Zone 2 OUT (AVR 355 only)
￿ Bridge II Connector (Stereo Jack IN AVR 255)		￿ Coaxial Digital Inputs		' A-BUS Connector (AVR 355 only)
￿ 8-Channel Direct Inputs		￿ Surround Back/Multiroom Speaker Outputs		( Remote IR Carrier Out (AVR 355 only)
￿ Digital Audio Outputs		￿ Video 2 Video Outputs		) Video 3 Component Video Inputs
￿ Video Monitor Outputs		￿ Video 1 Video Inputs		(AVR 355 only)
￿ Reset Button		￿ Optical Digital Inputs		* A-BUS IR Out (AVR 355 only)
￿ Front Speaker Outputs		￿ Analog 4 Audio IN		+ Main Power Switch
￿ Center Speaker Outputs		￿ Video 2 Video Inputs
NOTE: To assist in making the correct connec-		￿AM Antenna: Connect theAM loop antenna		￿ Analog 5 IN: Connect these jacks to the
tions for multichannel input/output and speaker		supplied with the receiver to these terminals.If an		PLAY/OUT audio jacks on any audio or video
connections, all connection jacks and terminals		externalAM antenna is used,make connections to		source.
have been color coded in conformance with the		the AM and GND terminals in accordance with		￿Analog 1 IN: Connect these jacks to the
latest CEA standards as follows:		the instructions supplied with the antenna.
				PLAY/OUT audio jacks on any audio or video
Front Left:	White
		￿ FM Antenna: Connect the suppliedindoor or		source.
Front Right:	Red
		an optional external FM antennato this terminal.
Center:	Green			￿ Analog 4 OUT: Connect these jacks to the
Surround Left:	Blue	￿Analog 2 IN: Connect these jacks to the		REC/IN audio jacks on any audio or video source.
Surround Right:	Gray	PLAY/OUT audio jacks on any audio or video
Surround Back Left:	Brown	source.
Surround Back Right:	Tan	￿Analog 2 OUT: Connect these jacks to the
Subwoofer (LFE):	Purple
		REC/IN audio jacks on any audio or video source.
Digital Audio:	Orange
Composite Video:	Yellow	￿ Subwoofer Output: Connect this jack to
Component Video “Y”:	Green	the line-level input of a powered subwoofer. If an
Component Video “Pr”:	Red	external subwoofer amplifier is used, connect this
Component Video “Pb”:	Blue	jack to the subwoofer amplifier input.

8REAR PANEL CONNECTIONS