HP BMD00022 manual RIP Route Redistribution configuration, Add 1-32 1-32all, Remove 1-32 1-32all

Table 140 RIP Interface Configuration Menu options

Command	Description
key	Configures the authentication key password.
enable	Enables this RIP interface.
disable	Disables this RIP interface.
cur	Displays the current RIP configuration.

RIP Route Redistribution configuration

Command: /cfg/l3/rip/redist fixedstaticospfeospf

[RIP Redistribute Fixed			Menu]
add	- Add rmap		into route redistribution list
rem	- Remove rmap from route redistribution list
export	-	Export all routes of this protocol
cur	-	Display current route-maps added

The following table describes the RIP Route Redistribute Menu options.

Table 141 RIP Redistribute Configuration Menu options

Command	Description
add <1-32> <1-32>all	Adds selected routing maps to the RIP route redistribution list. To add all
	the 32 route maps, enter all. To add specific route maps, enter routing
	map numbers one per line, NULL at the end.
	This option adds a route map to the route redistribution list. The routes of
	the redistribution protocol matched by the route maps in the route
	redistribution list will be redistributed.
remove <1-32> <1-32>all	Removes the route map from the RIP route redistribution list.
	Removes routing maps from the list. To remove all 32 route maps, enter
	all. To remove specific route maps, enter routing map numbers one per
	line, NULL at end.
export <1-15>none	Exports the routes of this protocol in which the metric and metric type are
	specified. To remove a previous configuration and stop exporting the
	routes of the protocol, enter none.
cur	Displays the current RIP route redistribute configuration.

Configuration Menu 167