HP BMD00022 manual IGMPv3 Snooping configuration, Command /cfg/l3/igmp/snoop/igmpv3

IGMPv3 Snooping configuration

Command: /cfg/l3/igmp/snoop/igmpv3

[IGMP V3	Snoop Menu]
sources		- Set the number of sources to snoop in group record
v1v2		- Enable/disable snooping IGMPv1/v2 reports
exclude		- Enable/disable snooping EXCLUDE mode reports
ena		- Enable IGMPv3 Snooping
dis		- Disable IGMPv3 Snooping
cur		- Display current IGMP Snooping V3 configuration

The following table describes the IGMPv3 Snooping Configuration Menu options.

Table 152 IGMPv3 Snooping Menu options

Command	Description
sources <1-64>	Configures the maximum number of IGMP multicast sources to
	snoop from within the group record. Use this command to limit the
	number of IGMP sources to provide more refined control.
v1v2 enabledisable	Enables or disables snooping on IGMP version 1 and version 2
	reports. When disabled, the switch drops IGMPv1 and IGMPv2
	reports. The default value is enabled.
exclude enabledisable	Enables or disables snooping on IGMPv3 Exclude Reports. When
	disabled, the switch ignores Exclude Reports. The default value is
	enabled.
ena	Enables IGMP version 3. The default value is disabled.
dis	Disables IGMP version 3.
cur	Displays the current IGMP version 3 parameters.

Configuration Menu 177