HP BMD00022 ACL Meter configuration, ACL Re-mark configuration, Command /cfg/acl/acl 1-384/meter

ACL Meter configuration

Command: /cfg/acl/acl <1-384>/meter

[Metering Menu]
cir	-	Set committed rate in KiloBits/s
mbsize	-	Set maximum burst size in KiloBits
enable	-	Enable/disable port metering
dpass	-	Set to Drop or Pass out of profile traffic
reset	-	Reset meter parameters
cur	-	Display current settings

This menu defines the metering profile for the selected ACL.

Table 175 ACL Meter Configuration Menu options

Command	Description
cir <1000-10000000>	Configures the committed rate, in Kilobits per second. The committed rate must be
	a multiple of 1,000.
mbsize <32-4096>	Configures the maximum burst size, in Kilobits. Enter one of the following values
	for mbsize: 32, 64, 128, 256, 512, 1024, 2048, or 4096.
enable ed	Enables or disables metering on the ACL.
dpass droppass	Configures the ACL Meter to either drop or pass out-of-profile traffic.
reset	Reset ACL Metering parameters to their default values.
cur	Displays the current ACL metering parameters.

ACL Re-mark configuration

Command: /cfg/acl/acl <1-384>/re-mark

[Re-mark Menu]
inprof	- In Profile Menu
outprof	- Out Profile Menu
reset	-	Reset re-mark settings
cur	-	Display current settings

You can choose to re-mark IP header data for the selected ACL. You can configure different remark values, based on whether packets fall within the ACL Metering profile, or out of the ACL Metering profile.

Table 176 ACL Re-mark Configuration Menu options

Command	Description
inprof	Displays the Re-mark In-Profile Menu.
outprof	Displays the Re-mark Out-of-Profile Menu.
reset	Reset ACL Re-mark parameters to their default values.
cur	Displays the current ACL re-mark parameters.

Configuration Menu 195