Show interface

Mode

Web User Interface

Usage Information

Enter the port number of a particular port to query, where unit is the stack member, slot is always 0 (zero), and port is the port number.

Privileged Exec

Inventory Information panel, accessed from the System node

The show interface command accepts other keywords besides unit/slot/port. See those syntax statements following this one.

Figure 9 shows an example of the show interface report when the argument is unit/slot/ port. Table 6 contains an explanation of the report fields.

Force10#show interface 1/0/2		0
Packets Received	Without Error
Packets Received	With Error	0
Broadcast Packets Received		0
Packets Transmitted Without Errors		579
Transmit Packet Errors		0
Collision Frames	...............................	0	day 0 hr 18 min 58 sec
Time Since Counters Last Cleared		0

The display parameters of the show interface command, when the argument is unit/slot/ port, are as follows:

Field	Description

Packets Received Without Error	The total number of packets (including broadcast
	packets and multicast packets) received on the
	interface.

Packets Received With Error	The number of inbound packets that contained errors
	preventing them from being deliverable to a higher-layer
	protocol.
Broadcast Packets Received	The total number of packets received that were directed
	to the broadcast address. Note that this does not
	include multicast packets.

Packets Transmitted Without Error	The total number of packets transmitted out of the
	interface.

Transmit Packet Errors	The number of outbound packets that could not be
	transmitted because of errors.

Collision Frames	The number of packet collisions

Time Since Counters Last Cleared	The elapsed time, in days, hours, minutes, and seconds
	since the statistics for this switch were last cleared.

66	System Management Commands