Force10 Networks S2410s manual Show vlan port, Display 802.1Q port parameters

show vlan port

Q: “T” indicates that the port is tagged; “U” indicates untagged.

Ports:”E” for Ethernet, followed by the port numbers (unit/slot/port) in the VLAN

The output of the show vlan brief command is shown in the following example:

Example

Force10#show vlan brief			IP Address
VLAN	Name	MAC Aging
---------	----------	--------	----------------
1	abc	1800	unassigned
2	egf	1800	unassigned
3	sss	1800	unassigned
5		1800	unassigned
12		1800	unassigned
13		1800	unassigned

Figure 32 Output of the show vlan brief Command

Description of the fields in the show vlan brief report:

VLAN: VLAN ID

Name: Assigned VLAN name

MAC Aging: Displayed in seconds

IP Address: IP Address assigned to the VLAN

Usage	For the show vlan id vlan-idcommand, the output is shown in the following example:
Information
Example	Force10#show vlan id 1
	Codes: * - Default VLAN, G - GVRP VLANs
	NUM	Status	Q Ports
	* 1	Inactive	U Gi 0/8,11

Figure 33 Output of the show vlan id Command

Description of the fields in the show vlan id report:

NUM: VLAN ID

Status: A VLAN is active only if the VLAN contains interfaces and those interfaces are operationally up.

Q: (T) tagged or (U) untagged information

Ports: Speed - whether it is 10G, 1G or fast Ethernet interface and port number (unit/slot/port)

show vlan port

Display 802.1Q port parameters.

Syntax show vlan port {unit/slot/port all}

130 System Configuration Commands