Force10 Networks S2410s Port-channel name, Port-channel staticcapability, All configured LAGs

		port-channel name
Parameters
	unit/slot/	Enter the logical ID of a configured LAG (slot/port format, such as 1/4).
	port
	all	Enter all to select all configured LAGs.
Default	enabled
Mode	Global Config

port-channel name

Syntax

Parameters

This command renames a LAG (port channel) or all LAGs.

port-channel name {unit/slot/port all} name

unit/slot/	Enter the logical ID of a configured LAG (slot/port format, such as 1/4).
port
all	Enter all to select all configured LAGs.
name	Enter an alphanumeric string up to 15 characters. This name replaces the
	user-entered name that was associated with the selected LAG when it was created.
	Or, if all was entered instead of the LAG ID, the entered name replaces the names

of all configured LAGs.

Mode	Global Config
Related
Commands
	addport	Add a port to a LAG. Ports added to a LAG must be physical ports, not other
		LAGs.
	port-channel	Create or delete a LAG.
	show port-channel	Display the configured LAG names and their IDs. The interface number is
		specified in logical slot/port format, which displays one (1) as the slot number;
		the port number is a sequential integer, based on existing LAG numbers when
		the new LAG is created.
		Before adding ports to the newly defined LAG, use this command to determine
		the logical ID to identify the LAG when associating a port with it.

port-channel staticcapability

	Enable/Disable static capability for all LAGs (port channels).
Syntax	[no] port-channel staticcapability
Default	disabled

SFTOS Command Reference for the S2410, Version 2.4.1.0 253