Force10 Networks S2410s manual Set igmp mcrtexpiretime global, Set igmp mcrtexpiretime interface

set igmp mcrtexpiretime (global)

set igmp mcrtexpiretime (global)

This command sets the Multicast router present expiration time for all routers.

Syntax [no] set igmp mcrtexpiretime 0-3600

Default

Mode

Related Commands

The variable is the amount of time in seconds that a switch will wait for a query to be received on an interface before the interface is removed from the list of interfaces with multicast routers attached. The range is 0 to 3600 seconds. A value of 0 indicates an infinite timeout, i.e. no expiration.

The no igmp mcrtexpiretime command sets the Multicast Router Present Expiration time on the interface to 0. A value of 0 indicates an infinite timeout, i.e. no expiration.

0

Global Config

igmp enable (interface)	Enables IGMP Snooping on a selected interface.
igmp mcrtexpiretime	Sets the Multicast router present expiration time on a selected interface.
(interface)
show igmpsnooping	Displays IGMP Snooping status information.

set igmp mcrtexpiretime (interface)

Command History

Related Commands

Version 2.3 Revised to igmp mcrtexpiretime.

igmp enable (interface)	Enables IGMP Snooping on a selected interface.
igmp mcrtexpiretime (interface)	Sets the Multicast router present expiration time on a selected
	interface.
set igmp mcrtexpiretime (global)	Sets the Multicast router present expiration time globally.
show igmpsnooping	Displays IGMP Snooping status information.

244 IGMP Snooping Commands