Force10 Networks S2410s manual Sntp unicast client poll-interval, Sntp unicast client poll-timeout

sntp unicast client poll-interval

sntp unicast client poll-interval

	This command sets the poll interval for SNTP unicast clients in seconds as a power of two
	where poll-intervalcan be a value from 6 to 16.
Syntax	sntp unicast client poll-interval poll-interval
	Use the no sntp unicast client poll-intervalcommand to reset the poll interval for SNTP
	unicast clients to its default.
Usage	You can also set the poll interval for an SNTP client with the sntp client port command.
Default	6
Mode	Global Config

sntp unicast client poll-timeout

	This command sets the number of seconds to wait for an SNTP response when the client is
	configured in unicast mode.
Syntax	sntp unicast client poll-timeout poll-timeout
	The poll-timeoutrange is 1 to 30 seconds.
	Use the no sntp unicast client poll-timeoutcommand to reset the poll timeout for SNTP
	unicast clients to its default value.
Default	5 seconds
Mode	Global Config

sntp unicast client poll-retry

This command sets the number of times to retry a request to an SNTP server after the first time-out before attempting to use the next configured server when configured in unicast mode.

Syntax sntp unicast client poll-retry poll-retry

The poll-retryfor SNTP unicast clients is an integer from 0 to 10 retries.

Use the no sntp unicast client poll-retryversion of this command to reset the poll retry for SNTP unicast clients to its default value.

SFTOS Command Reference for the S2410, Version 2.4.1.0 217