Force10 Networks S2410s manual Show ip dhcp global configuration, Show ip dhcp pool configuration

show ip dhcp global configuration

show ip dhcp global configuration

	This command displays address bindings for the specific IP address on the DHCP server. If
	no IP address is specified, the bindings corresponding to all the addresses are displayed.
Syntax	show ip dhcp global configuration
Mode	Privileged Exec and User Exec
	Service DHCP—The field to display the status of dhcp protocol.
	Number of Ping Packets—The maximum number of Ping Packets that will be sent to verify that an ip
	address id not already assigned.
	Excluded Address—The ranges of IP addresses that a DHCP server should not assign to DHCP clients.

show ip dhcp pool configuration

	This command displays pool configuration. If all is specified, configuration for all the pools
	is displayed.
Syntax	show ip dhcp pool configuration {name all}
Mode	Privileged Exec and User Exec
	Pool Name—The name of the configured pool.
	Pool Type—The pool type.
	Lease Time—The lease expiration time of the IP Address assigned to the client.
	DNS Servers—The list of DNS servers available to the DHCP client
	Default Routers—The list of the default routers available to the DHCP client
	The following additional field is displayed for Dynamic pool type:
	Network—The network number and the mask for the DHCP address pool.
	The following additional fields are displayed for Manual pool type:
	Client Name—The name of a DHCP client.
	Client Identifier—The unique identifier of a DHCP client.
	Hardware Address—The hardware address of a DHCP client.
	Hardware Address Type—The protocol of the hardware platform.
	Host—The IP address and the mask for a manual binding to a DHCP client.

SFTOS Command Reference for the S2410, Version 2.4.1.0 213