Force10 Networks S2410s manual Default-router, Dns-server, Domain-name

default-router

default-router

	This command specifies the default router list for a DHCP client. {address1, address2…
	address8} are valid IP addresses, each made up of four decimal bytes ranging from 0 to 255.
	IP address 0.0.0.0 is invalid.
	The no version of this command removes the default router list.
Syntax	default-routeraddress1 [address2....address8]
	no default-router
Default	None
Mode	DHCP Pool Config

dns-server

	This command specifies the IP servers available to a DHCP client. Address parameters are
	valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP address
	0.0.0.0 is invalid.
	The no version of this command removes the DNS Server list.
Syntax	dns-serveraddress1 [address2....address8]
	no dns-server
Default	none
Mode	DHCP Pool Config

domain-name

	This command specifies the domain name for a DHCP client. The domain specifies the
	domain name string of the client.
	The no version of this command removes the domain name.
Syntax	domain-name domain
Default	none
Mode	DHCP Pool Config

206 DHCP Server Commands