Force10 Networks S2410s Interface range, Specified interface, Configuration, Range ,range

interface

Related	enable passwd	Configure a password for the enable command.
Commands
	configure	Use this command to access the Global Config mode from the Exec
		Privilege mode.

interface

	This command accesses the Interface Config mode for a designated logical or physical
	interface. The Interface Config mode provides access to configuration commands for the
	specified interface.
Syntax	interface unit/slot/port
	The unit/slot/port is a valid physical or logical port number. Physical ports are numbered
	#/0/1 through #/0/50. In contrast, logical port numbers contain a number in the slot position
	and are defined by the system. The number in the slot position is a 1 when you create a LAG
	(port channel).
	The no version of this command deletes the selected logical port.
Default	None
Mode	Global Config
Related	interface range	Groups a set of individual interfaces, a range of interfaces, or more than one
Commands		range of interfaces, to which subsequent configuration commands can be
		applied (bulk configuration)
	interface vlan	Creates a new VLAN and accesses the Interface VLAN mode for it, or
		selects an existing VLAN and accesses the Interface VLAN mode for it.

interface range

	This command groups a set of individual interfaces, a range of interfaces, or more than one
	range of interfaces, to which subsequent configuration commands can be applied (bulk
	configuration).
Syntax	interface range {ethernet range,range,... port-channel range,range,... vlan
	range,range,...}

108 System Configuration Commands