Force10 Networks S2410s manual No spanning-tree mst, Spanning Tree STP Commands

no spanning-tree mst

Syntax

Default

Mode

Related Commands

If the “cost” token is specified, this command sets the path cost for this port within a multiple spanning tree instance or the common and internal spanning tree instance, depending on the mstid parameter. The pathcost can be specified as a number in the range of 1 to 200000000 or auto. If "auto" is specified, the pathcost value will be set based on Link Speed.

If the “external-cost” token is specified, this command sets the external-path cost for MST instance “0” in other words, CIST instance. The external pathcost can be specified as a number in the range of 1 to 200000000 or auto. If "auto" is specified, the external pathcost value will be set based on Link Speed.

If the “port-priority” token is specified, this command sets the priority for this port within a specific multiple spanning tree instance or the common and internal spanning tree instance, depending on the mstid parameter. The port-priority value is a number in the range of 0 to 240 in increments of 16.

spanning-tree mst mstid {{cost 1-200000000auto} port-priority 0-240}

no spanning-tree mst

cost: auto; external-cost: auto; port-priorty: 128

Interface Config

interface	Identifies an interface and enters the Interface Config mode.
interface range	Defines an interface range and accesses the Interface Range mode

no spanning-tree mst

This command sets the Path Cost or Port Priority for this port within the multiple spanning tree instance or in the common and internal spanning tree to the respective default values. If the mstid parameter corresponds to an existing multiple spanning tree instance, then the configurations are done for that multiple spanning tree instance. If however 0 (defined as the default CIST ID) is passed as the mstid, then the configurations are performed for the common and internal spanning tree instance.

If the “cost” token is specified, this command sets the path cost for this port within a multiple spanning tree instance or the common and internal spanning tree instance, depending on the mstid parameter, to the default value, in other words, a pathcost value based on the Link Speed.

If the “external-cost” token is specified, this command sets the external path cost for this port for mst “0” instance, to the default value, in other words, a pathcost value based on the Link Speed.

270 Spanning Tree (STP) Commands