Force10 Networks S2410s manual Igmp mrouter interface enable, No igmp mrouter vlanId

igmp mrouter (interface)

Related	igmp enable (interface)	Enables IGMP Snooping on a selected interface.
Commands
	set igmp mcrtexpiretime	sets the Multicast router present expiration time for all routers.
	(global)
	interface range	Defines an interface range and accesses the Interface Range mode
	show igmpsnooping	Displays IGMP Snooping status information.
	show igmpsnooping	Displays IGMP Snooping status information.

igmp mrouter (interface)

Syntax

Mode

Command

History

Related

Commands

This command configures the VLAN ID (vlanId) that has the multicast router mode enabled.

[no] igmp mrouter vlanId

The no version of this command disables multicast router mode for a particular VLAN ID (vlanId).

Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.

Version 2.3 Modified: Revised from set igmp mrouter. Added Interface Range mode.

igmp enable (interface)	Enables IGMP Snooping on a selected interface.
interface range	Defines an interface range and accesses the Interface Range mode
interface	Identifies an interface and enters the Interface Config mode.

igmp mrouter interface enable

Syntax

Default

Mode

Command History

This command configures a selected interface as a multicast router interface. When configured as a multicast router interface, the interface is treated as a multicast router interface in all VLANs.

[no] igmp mrouter interface enable

The no version of this command disables the status of the interface as a statically configured multicast router interface.

disable

Interface Config

Version 2.3 Revised from set igmp mrouter interface.

240 IGMP Snooping Commands