Force10 Networks S2410s Virtual LAN Vlan Commands, Virtual LAN Vlan commands in this section are

shutdown all

Syntax [no] shutdown all

Default enabled

Mode Global Config

Virtual LAN (VLAN) Commands

In SFTOS 2.4.1, the interface vlan command is the starting point for VLAN configuration. Executing the command creates a new VLAN and invokes the Interface VLAN mode, where all VLAN configuration commands reside for the specified VLAN. You execute this interface vlan command (see interface vlan on page 123) from the Global Config mode.

Table 18 Commands in the Interface VLAN Mode

	Command/Command Family	Location of
Commands	Description	Command Syntex Description
description	Add a description to the VLAN.	This chapter
encapsulation	Configure interface link layer	This chapter
(VLAN)	encapsulation type.
exit	Leave the mode.
help	Display help for various special keys.
igmp	Configure IGMP Snooping parameters	IGMP Snooping Commands on
	for the VLAN.	page 235
ip	Configure IP parameters.
makestatic	Change the VLAN type from Dynamic to	This chapter
	Static.
mtu (VLAN)	Set the default MTU size.	This chapter
name (VLAN)	Configure an optional VLAN name.	This chapter
protocol	Configure the protocols associated with	This chapter
	particular group IDs.
tagged/	Configure tagging for a specific VLAN	This chapter
untagged	port.

Virtual LAN (VLAN) commands in this section are:

•clear vlan on page 121

•description on page 122

•encapsulation (VLAN) on page 123

•interface vlan on page 123

•makestatic on page 124

•mtu (VLAN) on page 125

•name (VLAN) on page 125

•network mgmt_vlan on page 126

120 System Configuration Commands