Force10 Networks S2410s Hardware-address, Host, From 0 to 255. IP address 0.0.0.0 is invalid

hardware-address

hardware-address

This command specifies the hardware address of a DHCP client.

The hardware-addressis the MAC address of the hardware platform of the client consisting of 6 bytes in dotted hexadecimal format.

The type indicates the protocol of the hardware platform. It is 1 for 10 MB Ethernet and 6 for IEEE 802.

The no version of this command removes the hardware address of the DHCP client.

Syntax [no] hardware-addresshardware-address [type]

Default ethernet

Mode DHCP Pool Config

host

	This command specifies the IP address and network mask for a manual binding to a DHCP
	client. Address and Mask are valid IP addresses; each made up of four decimal bytes ranging
	from 0 to 255. IP address 0.0.0.0 is invalid.
	The prefix-length is an integer from 0 to 32.
	The no version of this command removes the IP address of the DHCP client.
Syntax	host address [mask prefix-length]
	no host
Default	none
Mode	DHCP Pool Config

SFTOS Command Reference for the S2410, Version 2.4.1.0 207