Force10 Networks S2410s manual Management route default gateway, Gateway

management route default

Default

Mode

Command History

Related Commands

None

Interface ManagementEthernet

Version 2.3	Introduced. Replaces the network mac-typecommand.
interface managementethernet		Invokes the Interface ManagementEthernet mode, the
		(Config-if-ma)# prompt.

management route default

Syntax

Parameters

Mode

Command History

Usage Information

This command sets the IP gateway of the switch. The management IP address (configured with the ip address, above) and the gateway must be on the same subnet.

management route default gateway

gateway Valid IP address

Use no management route default to remove the gateway.

Global Config

Version 2.3	Introduced: Replaces the network parms command for the gateway part of the
	management address.

Use this command along with the ip address command to configure the management address of the switch. Execute the interface managementethernet command from Global Config mode to access the ip address command, as shown in the following example.

Note: The IP Address and the gateway must be on the same subnet.

60 System Management Commands