Force10 Networks S2410s Show port-security static, Show port-security violation, Locked port

show port-security static

show port-security static

	This command displays the statically locked MAC addresses for port.
Syntax	show port-security static unit/slot/port
Mode	Privileged Exec
	The one report field is:
	MAC Address—MAC Address of statically locked MAC

show port-security violation

	This command displays the source MAC address of the last packet that was discarded on a
	locked port.
Syntax	show port-security violation unit/slot/port
Mode	Privileged Exec
	The one report field is:
	MAC Address—MAC Address of discarded packet on locked port

Port-Based Network Access Control (IEEE 802.1X)

This section contains the following commands:

•authentication login on page 169

•clear dot1x statistics on page 170

•clear radius statistics on page 170

•dot1x defaultlogin on page 170

•dot1x initialize on page 171

•dot1x login on page 171

•dot1x max-req on page 171

•dot1x port-control on page 172

•dot1x port-control all on page 172

•dot1x re-authenticate on page 173

•dot1x re-authentication on page 173

•dot1x system-auth-control on page 174

168 Security Commands