Force10 Networks S2410s manual Syntax show monitor session, Show port unit/slot/port all

show port

Syntax show monitor session 1

Mode Privileged Exec

Example

Force10 #show monitor session 1
Session ID	Admin Mode	Probe Port	Mirrored Port
----------	----------	----------	-------------
1	Enable	2/0/26	1/0/1

Figure 27 Command Example: show monitor session 1

Field Session ID—In all released versions of SFTOS, the session is always 1.

Descriptions

Admin Mode—Indicates whether the Port Mirroring feature is enabled or disabled. The possible values are Enable and Disable.

Probe Port unit/slot/port—The unit/slot/port configured as the probe port (destination port for mirroring). If this value has not been configured, 'Not Configured' will be displayed.

Mirrored Port unit/slot/port—The unit/slot/port configured as the monitored port (source port, mirrored port). If this value has not been configured, 'Not Configured' will be displayed.

Related	monitor session	Adds a mirrored port (source port) or probe port (destination port) to
Commands		a session identified with the session ID of 1.
	monitor session 1 mode	Sets the monitor session (port monitoring) mode to enabled.

show port

Syntax

Mode

Command

History

This command displays port information for a selected port or for all ports. The Port Summary panel of the Web User Interface displays the same information.

show port {unit/slot/port all}

Privileged Exec

Version 2.3 Modified: Revised to include VLAN interface IDs in the Interface column of the report.

SFTOS Command Reference for the S2410, Version 2.4.1.0 117