Force10 Networks S2410s manual S2410, If Index values are, All, Count

		show mac-addr-table
Parameters
	macaddr	(OPTIONAL) Enter a 6 byte Mac address.
	all	(OPTIONAL) Enter all to get results for all interfaces.
	interface unit/slot/port	(OPTIONAL) To show MAC addresses on a particular interface, enter
		the keyword interface followed by the interface unit, slot, and port.
		This can be a physical or logical interface.
	vlan VLAN_ID	(OPTIONAL) To show MAC addresses on a particular interface, enter
		the keyword vlan followed by the VLAN_ID.
	count	(OPTIONAL) Display Multicast Forwarding Database (MFDB) count.
Mode	Privileged Exec
Example

(S50-TAC-8) #show mac-addr-table all
Mac Address	Interface		IfIndex	Status
-----------------------	---------		-------	------------
00:01:00:01:00:00:00:37	0/1	1		Learned
00:01:00:03:00:00:00:03	0/2	2		Learned
00:01:00:D0:95:B7:CD:2E	3/1	25	Management
00:01:00:01:E8:07:10:18	1/1	26	Learned

	Figure 13 Example of Output from the show mac-addr-table all Command
Field	Mac Address—A unicast MAC address for which the switch has forwarding and or filtering information.
Descriptions	The format is 6 or 8 two-digit hexadecimal numbers that are separated by colons, for example
	01:23:45:67:89:AB. In an IVL system, the MAC address is displayed as 8 bytes.

Note: IVL (Independent VLAN Learning) allows unicast address-to-port mappings to be created based on a MAC address in conjunction with a VLAN ID. In an IVL system, the MAC address is displayed as 8 bytes.

Interface—The Unit/Slot/Port at which this address was learned.

Note: The “3/1” in the Interface column references the Ethernet Management port.

See Figure 13 and Figure 15.

If Index—This object indicates the IfIndex of the interface table entry associated with this port.

In the S2410, If Index values are:

Headings	Explanation
Physical ports	1 through 24 (24 ports)
Ethernet Management port (labelled “10/	25
100 Ethernet “, also called service port):
LAGs (port channels)	26 to 37 (12 possible LAGs)

Status—The status of this entry. The meanings of the values are:

SFTOS Command Reference for the S2410, Version 2.4.1.0 79