Force10 Networks S2410s manual Show dot1q-tunnel interface unit/slot/port all

		show dot1q-tunnel
Related
	show dot1q-tunnel	Displays information about Double VLAN Tunneling for a specified
Commands		interface or for all interfaces.
	show dvlan-tunnel	same as above

show dot1q-tunnel

Syntax

Parameters

Mode

Web User Interface

Usage Information

Example

This command displays whether an interface is enabled for Double VLAN Tunneling, along with the system-configured etherType and detailed information about Double VLAN Tunneling for the specified interface, or a list of interfaces and their tunneling status. This command performs the same function as show dvlan-tunnel.

show dot1q-tunnel [interface {unit/slot/port all}]

interface {unit/slot/ Enter the interface keyword followed by either a specific address in

port all}]the form of unit/slot/port or enter the word all.

Unit/Slot/Port—Valid unit, slot and port number separated by forward slashes.

Privileged Exec and User Exec

Double VLAN Tunneling Summary (This S50 Web Interface panel has similar functionality. Access it in the node tree through System >> Port >> Double VLAN Tunneling.)

The following screen capture shows the use of the three ways of using the command— without the interface keyword and with the keyword followed by a port number or all.

(S2410) >show dot1q-tunnel ?
<cr>		Press Enter to execute the command.
interface		Enter interface.
(S2410) >show dot1q-tunnel			None
Interfaces Enabled for DVLAN Tunneling
(S50-8) >show dot1q-tunnel interface 1/0/1
Interface	Mode	EtherType
---------	-------	--------------
1/0/1	Disable	802.1Q
(S50-8) >show dot1q-tunnel interface all
Interface	Mode	EtherType
---------	-------	--------------
1/0/1	Disable	802.1Q
1/0/2	Disable	802.1Q
1/0/3	Disable	802.1Q
1/0/4	Disable	802.1Q
1/0/5	Disable	802.1Q
1/0/6	Disable	802.1Q
1/0/7	Disable	802.1Q
1/0/8	Disable	802.1Q
1/0/9	Disable	802.1Q
1/0/10	Disable	802.1Q

![truncated]!

SFTOS Command Reference for the S2410, Version 2.4.1.0 223