Force10 Networks S2410s No monitor session, Show forwardingdb agetime, Show mac-address-table

no monitor session 1

no monitor session 1

This command removes all the source ports and a destination port of the mirroring session and restore the default value for mirroring session mode.

The 1 or session-idparameter is an integer value used to identify the session. In the current version of the software, the session-idparameter is always 1.

This is a stand-alone “no” command. This command does not have a “normal” form. This command can be issued without regard for the session status (enabled or disabled).

Syntax no monitor session 1

Default enabled

Mode Global Config

show forwardingdb agetime

This command displays the timeout for address aging.

Syntax show forwardingdb agetime

Mode Privileged Exec

Example

Force10 #show forwardingdb agetime

Address Aging Timeout:300

Force10#

Figure 25 Example of show forwardingdb agetime Command Output

Command
	Version 2.3	Modified: Removed parameters and statements relating to IVL.
History

show mac-address-table

This command displays the Multicast Forwarding Database (MFDB) statistics.

Syntax show mac-address-table {gmrp igmpsnooping multicast stats}

gmrp—Display GMRP entries in the MFDB table.

114 System Configuration Commands