Force10 Networks S2410s Show igmpsnooping fast-leave, Show igmpsnooping mrouter interface, Vlan

show igmpsnooping fast-leave

Max Response Time—This displays the amount of time the switch will wait after sending a query on an interface because it did not receive a report for a particular group on that interface. This value may be configured.

Multicast Router Present Expiration Time—If a query is not received on an interface within this amount of time, the interface is removed from the list of interfaces with multicast routers attached. This value may be configured.

When the optional argument 1-3965is used, the response is the same as for unit/slot/port, except that one more report field is added:

Vlan ID—This echoes the number of the VLAN specified in the parameter.

show igmpsnooping fast-leave

Command
	Version 2.3	Deprecated: Use show igmpsnooping to display whether or not IGMP Snooping is
History
		enabled on the designated interface.

show igmpsnooping mrouter interface

This command displays information about statically configured ports.

Syntax

Parameters

Mode

Report Fields

show igmpsnooping mrouter interface {unit/slot/port vlan 1-3965}

unit/slot/port	Display ports on which Multicast Routers are detected. Enter
	interface in unit/slot/port format.
vlan 1-3965	Display VLANS for the specified interface on which Multicast Routers
	are detected.

Privileged Exec

unit/slot/port—The port on which multicast router information is being displayed.

Multicast Router Attached—This indicates whether or not multicast router is statically enabled on the interface.

VLAN ID—The list of VLANs of which the interface is a member.

246 IGMP Snooping Commands