POWERMATE CARE
Always follow all safety precautions when performing maintenance to the PowerMate,
,CAUTION
Moving Parts! To reduce the risk of
personal injury, DO NOT touch the
agitator when the vacuum cleaner is
ON. Contacting the agitator while it is rotating can cut,
bruise, or cause other injuries.
Always turn off and unplug vacuum cleaner from electrical outlet before servicing.
Use caution when operating this product near small children.
I wARNING
Electrical Shock Or Personal Injury
Hazard
Always turn off and unplug vacuum
cleaner before performing maintenance to the vacuum cleaner. Failure to do so
could result in electrical shock or personal injury from vacuum cleaner
L_t%]
suddenly .starting..........
TO REMOVE BELT
1. Remove floor brush from the PowerMate.
Brush
Releas_ejf
Pedal
5.Unscrew two (2) agitator cover screws and remove agitator cove r.
2. Turn |
|
|
|
|
upside | down | and | _ | |
unscrew | five | (5) |
| ._ |
PowerMate |
|
| ||
screws_ |
|
| _ |
|
PowerMate cover |
|
3.Turn PowerMate right side Upr
4.TO remove
cover, grasp the side latches and
pull out,
assembly out
and remove
6. Lift agitator worn belt,
7. Check and clean end cap area& See AGITATOR ASSEMBLY for picture of complete agitator assembly.
19