CANISTER
1.Open the canister hood
2.Check to see that the dust bag is properly installed See BAG CHANGING for instructions.
3.Check to see that the motor safety filter is properly instalied See MOTOR SAFETY FILTER CHANGING for instructions.
HOOD AND TOOL
STORAG E COVER
It is normal for the canister hood and tool storage cover to come off when opened further than needed. Line up the hinge slots, insert the hinges into the slots, and close the hood and tool storage cover to reinstall
CAUTION
Never open canister hood with the tool storage cover open. This will help to prevent damage from occurring to the canister hood andlor tool storage cover.
This canister is equipped with an
storage area for a Pet PowerMate attachment.
To Install:
Open the Pet PowerMate storage cover Insert the Pet PowerMate, press down into place, and close the lid securely.
To Remove:
Open the storage cover. Remove Pet PowerMate from the storage area and use as needed (see ATTACHMENTS and
ATTACHMENT USE TABLE),
HOSE
1.Line up tl_e hose latch tab and notch
in canister hood
and insert hose into canister until it snaps into place
To remove: Do not open hood before removing hose. With hood closed, lift hose latch tab upward and pull on hose.
| 2. Insert | handle | ||
Handle | into wand | until | ||
| lock | button | ||
| snaps | in place. | ||
| Be | sure | hose is | |
| not | twisted° | ||
| To remove: | |||
Lock | Press | handle | ||
| quick | release | ||
Handle | button | and pull | ||
Quick | up on | handle. | ||
| ||||
To store; Disconnect hose form wands and
canister to prevent stress on hose during storage_ Store hose in a loosely coiled position on the hose covering is not stressed°
f et PowerMate
Storage Cover
