INSTALLATIONS
WARNING
The installations described in the figures should be made by qualified service personnel or system installers.
■Mounting into the Rack
The matrix switcher can be mounted into the rack as described.
1.Remove the four rubber feet by unwinding the four screws on the bottom of the matrix switcher.
Notes:
•An optional cooling fan attached inside the unit is subject to wear. It needs to be replaced periodical- ly.
Keep the temperature in the rack below 45 °C (113 °F) at any time.
•If the rack is subject to vibration, secure the rear of the appliance to the rack by using additional mount- ing brackets (procured locally).
■Installing the Multiplexer Board
MUX
To use
Remove 4 rubber feet
2.Place the rack mounting brackets on both sides of the matrix switcher and tighten with the four supplied screws (M4 X10).
3.Install the matrix switcher in the rack with the rack mounting brackets secured with four screws (procured locally).
32
