Panasonic WJ-SX150A manual System Status Table, Setup Procedures, Extended Functions

■System Status Table

The current system status can be identified.

The continuous display becomes possible by the OSD set- ting.

		SYSTEM STATUS
MON	CAM	MODE	KB	OPE	PRI
1	01	T01	K1	12345	30
2	99	SPOT	K2	2	2
3	04	ALARM	K4	4	1
4	R1	RECORDER	PC	30	1

MON: Monitor number

CAM: Camera number / Recorder number

MODE: Operation mode

KB: Controller name

OPE: Operator number

PRI: Priority

■Setup Procedures

To use the unit, it is necessary to configure the system through the following setup procedures:

•OSD setup with an active monitor and system controller The basic parameters are configurable to operate the unit.

•WJ-SX150A Administrator Console with the PC

The setup utility can configure all the functions of the unit.

Refer to p. 63 WJ-SX150A SETUP MENU (OSD) and p. 79 WJ-SX150A ADMINISTRATOR CONSOLE for details.

■Extended Functions

If a recorder is connected to the matrix switcher, the follow- ing will be available.

●Recorder Connection

The operations are conducted with the buttons on the recorder, system controller or PC.

•The setup of the recording device

•The playback of the recorded images (the multiscreen display, still picture, etc.)

•The search for the recorded image

•Forward or backward search

•Forward of backward field advance

•Fast-forward

•Rewind

•Index

Refer to each device's operating instructions for details.

19