Cable Specifications, AG6730, AG6740 RT850 | Panasonic WJ-SX150A

●Cable Specifications

AG6730, AG6740				RT850

Matrix Switcher		Time-lapse VCR
1		1		Matrix Switcher			RT850
2		2		1				1

3		3		2				2

4		4		3				3

5		5		4				4

6		6		5				5

7		7		6				6

8		8		7				7

9		20		8				8

				9				9

		22				Straight Cable
Frame			Frame

Shield

■Connection with the Time-lapse VCR (Non-Panasonic Models)

MUX

1.To record the camera images through a time-lapse VCR, install an optional Multiplexer board in the matrix switcher.

2.Select OFF for 600 RECORDER in SETUP MENU. (Refer to p. 71.)

3.Connect the matrix switcher’s EXT OUT (REC OUT) to the time-lapse VCR’s video input connector with the coaxial cable.

4.Connect the matrix switcher’s EXT IN (PLAY IN) to the time-lapse VCR’s video output connector with the coaxial cable.

Notes:

•To use the alarm recording function, connect the matrix switcher’s all alarm output terminals (Alarm Output 1 to 4) to the time-lapse VCR’s ALARM IN.

•Be sure to set the VCR to automatically recover from alarm reset.

	Pin #10(Alarm out 1)
Pin #13	Pin #11(Alarm out 3)	Matrix Switcher
(Recover Input)

													EXT IN	3	1
			ALARM				SERIAL						(PLAY IN)
			ALARM				SERIAL			RS485(CAMERA)		CAMERA
				DATA HDR DATA 4			DATA 3 DATA 2 DATA 1			RS485(CAMERA)			SW IN
				DATA HDR DATA 4			DATA 3 DATA 2 DATA 1				LINE		SW IN
			TERM							2	SELECT	4
			OFF	ON						2		4
Pin #24(Alarm out 4)					PS•DATA		RS485(CAMERA)						EXT OUT	4	2
					PS•DATA		RS485(CAMERA)						(REC OUT)	MONITOR OUT

Pin #23(Alarm out 2)
	Pin #9(GND)
										Time-lapse VCR
		VIDEO IN					VIDEO OUT
						S-VIDEO
						AUDIO
			CAMERA
		GND SW OUT
					1	2
					1
							4
1	2	3	4	5	6	7	8	9	10 11 12 13 14 15 16
1	ALARM			5	ALARM			9		WARNING			13	SERIES
1		IN		5		OUT		9		OUT			13	REC IN
2		COM		6	1 SHOT IN			10	HUMID OUT				14	SERIES
2		COM		6	1 SHOT IN			10	HUMID OUT				14	REC OUT
3	ALARM			7		COM		11		REC OUT			15	TIME
3	RESET IN			7		COM		11		REC OUT			15	ADJUST IN
4	ALARM			8	TAPE END			12	REC REVIEW				16	TIME
4	RECOVER OUT			8		OUT		12		OUT			16	ADJUST OUT

47

Image 47

Panasonic WJ-SX150A manual Cable Specifications, AG6730, AG6740 RT850

Contents

Operating Instructions English Version Important Safety Instructions Contents Appendix Operating Procedures Terminal ModeOperating Procedures PS·DATA Expanded Function Preface Features Document Convention PrecautionsPage Features of the Matrix Switcher System Spot Mode Matrix Switcher System DescriptionsCrosspoint Switches Monitoring Mode Camera control Sequence ModeSystem Control About System Controller Example of a System with Basic Functions Monitor Matrix switcher Operator Registration Terminal Mode DescriptionsLog-in/Log-out Display Position Monitor-related FunctionsMonitor Selection Information Displayed on the Monitors Pan/Tilt Head Control Operating Zoom Lens Housing ControlCamera-related Functions Camera Selection Controllable Camera-related Functions Alarm-related FunctionsCamera Cleaning External Equipment Control Timer Event Recorder Connection Setup ProceduresSystem Status Table Extended Functions Zoom Alarm priority modeMultiplexer Board Function Multiscreen display Motion detector Master-slave Connection Notification about PS·DATA Controller Operation Detailed Product Description Multiplexer Software Upload WJ-SX150A Matrix SwitcherFront View SX150A Software Upload EXT OUT/REC OUT MUX Rear ViewCamera SW in MUX Down WV-CU360C/CU360CJ System Controller Terminal ModeFront View WV-CU360C Front View WV-CU360CJ Preset $6Recorder button Recorder 2Setup button Setup$4Next button Next $5Previous button Prev Rear View Page Installations and System Connections Mounting into the Rack InstallationsInstalling the Multiplexer Board This is an example of basic system connection System Connection ExamplesBasic System Connection System Expansion Connection Monitor Outputs Slave Connection with the Camera Sites Connections RS485 Port Home Run WiringDaisy Chain Wiring Connection for RS-485 Type Camera Connection with the Monitors Switch on the end unit should be set to on DATA1 to DATA4 Port Specification of Recover Input 5 V DC / 0 V low- active To Confirm the Images from a Recorder Connected to the Unit Connection with the Alarm OutputConnection with Digital Disk Recorder WJ-HD500 Series EXT To Record the Camera Images in Maximum Recording Rate EXT Monitor OUT To Control a Recorder via the Network Screen OUT Data Connection with Digital Disk Recorder WJ-HD200 Series Data HDR Data HDR Port Data HDR PortData bit 8 bits Parity check None Stop bit 1 bit Parity check ODD Stop bit 1 bit Connection with the Time-lapse VCR Panasonic Models AG6730, AG6740 RT850 Cable Specifications Following parameters are fixed. Data bit 8 bits Time Adjustment with an External EquipmentMaster Clock Connection Example for Time Adjustment Connection with the PC Master-slave Connection Master Camera 33 to Pattern 2 Master, Slave 1 and 2 are connected in the system Master Camera 49 to Pattern 3 Master, Slave 1 to 3 are connected in the system Pattern 4 Master, Slave 1 to 4 are connected in the system PreparationUnit Number Selection Data Port Connection Video Cable Connection Connection between the Units and Cameras With WJ-SX150A Administrator Console Software SetupRecorder Setup With Setup MenuPage WJ-SX150A Setup Procedures Baud Rate Data Bit Parity None Stop Bit Firmware UpdateInstallation of SX150A Program Writer Firmware Update of SX150A Program Writer Sdram Initialize COMPLETED.START LOAD- ING… Wait until the following message appears Not Ready Error ListFile Error Timeout Error Sequence Settings Setup ProceduresDescription of Setup Procedures Master-Slave Connection Settings Setup File Operation Alarm SettingsOperator Settings System Settings This is the factory default setting WJ-SX150A Setup Menu OSDDisplaying Setup Menu Programming Setup Menu Day How to DisplayParameters Month · D. S. T.... Summer Time Press the numeric button to enter the correct time T. Daylight Saving TimeYear Press the numeric button to enter the correct year Alarm Setup Camera Alarm Port MUX Motion DET MUX Following is the setting procedureSerial Port LOW MASTER/620 SLAVE1/630 Slave 2/640 Slave 3/650 Slave How to edit Comm Port Serial Port EXTParity BIT None Parity BIT ODD Slave 1 to When only Master is connectedWhen Master and Slave 1 are connected When Master, Slave 1 and 2 are connected Setting for normal connection When Master, Slave 1 to 3 are connectedWhen Master, Slave 1 to 4 are connected Mode Master unit setting for Master-Slave connectionFactory default setting Operator Registration CAM 1 to 16 = View & Control for Operator no to AlarmCAM 01 to MUX Camera Title MUX Installation WJ-SX150A Administrator ConsoleDescription of WJ-SX150A Administrator Console Installation/Uninstallation Startup/Termination Before Using WJ-SX150A Administrator ConsoleMain Window Master-Slave Logical Camera Number Logical Camera NumberSlave CAM 1 to OK button Get a Configuration Data from SX150AFile name of the configuration data appears Put a file to SX150A Dwell PresetTour Sequence Mon 1 Mon EnableSchedule Mode Group Group Sequence Saves the configuration and closes the Timer Event win- dow Camera CleaningCamera Auto Cleaning Auto Cleaning Camera Date Group Daylight Saving Time/Summer Time Camera Alarm ModeAlarm Mode Alarm Input Group LCN/Tour Alarm EventSensitivity MUX Mon Monitor Num Alarm PortAlarm Port Operator Registration Add Operator Number Camera Access GroupLevel Table Operator Number Auto Logout Box Auto Login/Logout Auto Log- in/Log-outAuto Login Box Monitor Selection Display Format How to displayTime & Date Clock Camera Title Cable Compensation/VD2/DATA To Edit a User Font Character Edit Camera TitleEdit Font Window Parameters Master Data PortParameters Normal Connection Unit Address RecorderParameters Slave 1 to Recorder Control Multi Monitor Out Group Multiplexer Mode MUX Normal Group Alarm GroupREC OUT Group System Group Multiplexer Title MUX Mux Alarm Group100 Account Manager Select Setup Data File101 New Parameter Group 102Communication Port Edit Account Manager 103 Log-in LOG-IN and LOG-OUT104 Auto Log-out 105Log-out Auto Log-in Applying Priority Lock Monitor Selection and Camera Selection106 Priority Lock Camera Selection 107 Pan/Tilt Control Camera Control108 Lens Control 109 Program Preset PositionCall Preset Position Camera Function Shortcut Function Camera SetupCamera Function Control 110 Patrol Learn and Play 111Changing to Black and White Images Camera Panning Function 112 Receiver Control Camera Site Accessories ControlCamera Housing Control 113 114 Running Sequence On-screen Display OSD Position Control Monitor Display Control115 On-screen Display OSD Control Moving the Monitor Status 116Moving the Camera Title Display Moving the Event Display Video Loss History Table Alarm History Table117 118 Alarm ControlOperation during an Alarm Mode Operation of an Alarm-related Camera ACK Press the Reset button while holding down the Shift button Resetting the Alarm InputsSuspending the Alarm Inputs Alarm All Reset Multiscreen Sequence Multiscreen Segment Switching120 Monitoring the Camera Picture Electronic Zooming EL-ZOOM 121Still Playback Spot Picture 122 123 124 When Using a PS·DATA System Controller 125 Monitor Control 126 127 128 Resetting All the Alarm InputsSuspending All the Alarm Inputs 129 Expanded Function Displaying WJ-HD500 Series WJ-HD500 Series Control Terminal Mode130 Normal Playback Recorder Mode131 Manual Recording Stopping REC only Alarm Recording132 Search Playback Thumbnail Display 133Record List/Thumbnail Display Record List Played back 134Other Operations Shift + Zoom Tele buttons Selects a group to be Date-and-time Search Playback WJ-HD200 Series Control Terminal Mode135 Displaying WJ-HD200 Series 136 Alarm Recall table Displaying WJ-HD100 Series Terminal Mode137 138 Rewind 139Controlling the Time-lapse VCR Fast-forward 140 NON-PANASONIC Models Terminal Mode Operations WJ-HD500 Series Control PS·DATA141 Controlling the Recorder with a PS·Data System Controller 142 143 WJ-HD200 Series Control PS·DATA 144 PS·DATA 145 Panasonic Models PS·DATA NON-PANASONIC Models PS·DATA 146 Video Loss Display Monitor Display When a Video Loss OccursCamera Switching Pulse Loss Display MUX 147 148 Troubleshooting Figuration. Refer to p Put a file to 149 150 151 Appendix 152 Transmission CommandResponse Command Communication Protocol Basic Operation Command TableTransmission Command Response Ascii Parameter Ascii 153 154 Alarm ControlSetup Control Camera Control 155 156 Setup Menu 157 REW 158 Inquiry 159 Miscellaneous Control 160 161 Error Code ListMatrix switcher and external devices Instruction Worksheets162 Logical Camera Number Checklist163 Master-Slave Camera Slave 164Master and Slave 1 to Tour Preset position Dwell time165 Tour Sequence Group Monitor Timer Event166 Group Sequence Daylight Saving Time Camera Auto CleaningAlarm Mode 167 168 Alarm Event 169 170 Alarm PortAlarm # Alarm Port N.C./Time Level Table 171 Cable Compensation/VD2 172Auto Log-in/Log-out Multiplexer 173Data Port Recorder Dynamic REC REC Out Alarm174 Optional Accessories SpecificationsStandard Accessories 2003