Panasonic WJ-SX150A manual Description of Setup Procedures, Master-Slave Connection Settings

SETUP PROCEDURES

■Setup Procedures

This unit has two setting procedures.

The one is SETUP MENU, which is the unit's on-screen dis- play (OSD).

The other is WJ-SX150A Administrator Console, which operates on the PC.

	Master-slave connection settings
	• Master-slave
	• Logical camera number
	Sequence settings
	• Tour sequence
	• Group sequence
(PC)	Schedule settings
	• Timer event
	• Camera cleaning
Console	• Daylight saving time
	Alarm settings
	• Alarm mode
AdministratorSX150A-	• Alarm event	SETUPMENU(OSD)
	• Cable compensation
	• Alarm input/Alarm port
	Operator settings
	• Operator registration
	• Level table
	• Monitor select (Monitor selection)
	• Auto login/logout (Auto log-in/log-out)
	System settings
WJ	• Clock (Time and date) *1
	• Data port *2
	• Camera title
	• Recorder
	• Multiplexer
	• Mux camera (Multiplexer) title

Setup file operation

•Put a file to SX150A

•Get a configuration data from SX150A

SX150A Admin Console configuration

•File open

•Account manager

•Communication (Serial) port

•Camera manual cleaning ON/OFF

*1 WJ-SX150A Administrator Console can configure the display pattern.

*2 WJ-SX150A Administrator Console can configure the communication speed (baud rate) of the ports Data 1 to 4.

•SETUP MENU (OSD)

The basic functions, which are essential for the operation, are configurable. However, some items are not config- urable. The settings about group sequences, operators and schedules, etc.

•WJ-SX150A Administrator Console (PC)

All the functions of this unit (except camera manual clean- ing) are configurable. You need a PC to use WJ-SX150A Administrator Console.

Refer to p. 79 WJ-SX150A ADMINISTRATOR CONSOLE for details on the platform and installation.

Notes:

•The Master unit administrates all the system settings. Do the setup procedure with the Master unit only.

•To use WJ-SX150A Administrator Console, you need to prepare a PC and a 9-pin D-sub cable.(Refer to p. 48.)

•When changing the configuration of WJ-SX150A Administrator Console, configuration data getting and putting are necessary between the unit and PC to acti- vate your configuration.

■Description of Setup Procedures

This chapter describes about configurable items.

●Master-Slave Connection Settings

Both SETUP MENU and WJ-SX150 Administrator console can configure the parameters of master-slave connection and logical camera number.

•Master-slave: The composition of the master-slave con- nection is configurable.

•Logical camera number: Logical camera number, which is used for camera control and monitor display, can be assigned to each camera.

●Sequence Settings

SETUP MENU can configure tour sequences. WJ-SX150A Administrator Console can configure both of tour sequences and group sequences.

•Tour sequence: Up to 32 tour sequences are config- urable (64 steps per tour).

•Group sequence: Tour sequences can be activated on up to 4 monitors simultaneously (1 tour sequence per monitor).

●Schedule Settings

SETUP MENU can configure daylight saving time. WJ- SX150A Administrator Console can configure timer event, camera cleaning, and daylight saving time.

•Timer event: A sequence or spot mode can be activat- ed on the regular time of every month, week or day.

Up to 50 timer events can be registered.

•Camera cleaning: Camera cleaning can be executed on the regular time of every month, week or day.

•Daylight saving time: Daylight saving time schedule for 20 years are configurable.

61