WJ-SX150A SETUP MENU (OSD)
The
■Displaying SETUP MENU
To display SETUP MENU, follow the procedure below.
1.Confirm that the camera and peripherals are correctly and securely connected and that all components are turned on.
2.To execute the selection, select one of the monitors (1 to 4) by pressing the numeric button, then press the MON (ESC) button.
The MONITOR indicator will light up.
3.Press the SETUP button while holding down the SHIFT button on the system controller.
The tree of SETUP MENU is shown in the next page. Note: “x.xx” in SETUP MENU shows the firmware ver-
4.To end the setting and return to the normal view, press the SETUP button while holding down the SHIFT button when SETUP MENU is displayed.
The system controller's SETUP indicator will go off.
■Programming SETUP MENU
As shown in the tree, SETUP MENU has 10 submenus: TIME & DATE, D. S. T., SEQUENCE, ALARM, CAMERA TITLE, RECORDER, SYSTEM, OPERATOR REGISTRATION, MULTIPLEXER, and MUX CAMERA TITLE. The submenus except TIME & DATE and D. S. T. are divided into addition- al submenus.
The (O) mark indicates that the item has a submenu for more detailed setups.
Refer to the figure in p. 65 for the composition of SETUP MENU.
sion.
SETUP SHIFT
* This is the factory default setting.
x.xx | |||
100 | TIME&DATE |
| /21/2002 10:55 AM |
Aug | |||
200 | D.S.T. | ON |
|
300SEQUENCEO
400ALARMO
500CAMERA TITLEO
600RECORDERO
700SYSTEMO
800OPERATOR REGISTRATIONO
900 MULTIPLEXERO
1000 MUX CAMERA TITLEO
The following functions and buttons are valid in SETUP MENU:
Joystick to UP(D): Moves the cursor up or returns to the previous page.
Joystick to DOWN(C): Moves the cursor down or dis- plays the next page.
Joystick to L(A): Moves the cursor to the left.
Joystick to R (B): Moves the cursor to the right.
PREV button: Selects the previous mode or parameter.
NEXT button: Selects the next mode or parameter.
Numeric buttons: Enters numerals.
CLEAR button: Deletes a character when editing a camera title.
CAM (SET) button: Executes the selections and dis- plays a submenu for items with the (O) mark.
MON (ESC) button: Returns to SETUP MENU or the previous menu.
This operating instructions uses the symbols to describe the buttons.
63
