Panasonic WJ-SX150A manual Inquiry, Transmission Command, Response ASCII, Parameter ASCII, Ascii

Inquiry

Item	Transmission Command	Response (ASCII)	Parameter (ASCII)
	(ASCII)
Model No	QID	qid:WJ-SX150A	Matrix switcher's model No.
Software version	QRV	qrv:*.**	qrv:*.**=Unit firmware version
		/*.**	/*.**= Master unit’s Multiplexer-board
		/*.**	firmware version
			/*.**= Slave 1 unit’s Multiplexer-board
		/*.**
			firmware version
		/*.**
			/*.**= Slave 2 unit’s Multiplexer-board
		/*.**	firmware version
			/*.**= Slave 3 unit’s Multiplexer-board
			firmware version
			/*.**= Slave 4 unit’s Multiplexer-board
			firmware version
Alarm history	QAD	qad:nnn:YYYYMMDD	nnn=alarm-event total number
		hhmmss:cc:ee:s	(000 to 100)
			*=Event of alarm n (n is a number).
			Display pattern:
			YYYYMMDDhhmmss:cc:ee:s
			YYYY=Year
			MM=Month
			DD=Day
			hh=Hour
			mm= Month
			ss=Second
			cc=Alarm number (associated with the cam-
			era number: 00 when the alarm is suspended)
			ee= Event
			00=ALARM
			01=ACK
			02=RESET
			03=ALARM SUSPEND
			s=Daylight saving time
			0=OFF
			1=ON
Video loss history	QVD	qvd:nnn: YYYYMMDD	nnn=video-loss total number
		hhmmss:cc:ee:s	(000 to 100)
			*=Event of video loss n (n is a number).
			Display pattern:
			YYYYMMDDhhmmss:cc:ee:s
			YYYY=Year
			MM=Month
			DD=Day
			hh=Hour
			mm= Month
			ss=Second
			cc=Video loss number (associated with the
			camera number: 00 in case of camera
			switching pulse loss/recovery)
			ee= Event
			00=Video loss
			01=Video loss recovery
			02=Camera switching loss
			03=Camera switching recovery
			04=SLAVE DOWN
			05=SLAVE RECOVER
			s=Daylight saving time
			0=OFF 1=ON

159