OPERATION
To switch between the seconds display and the day of the week, press CLOCK.
To switch between viewing the month/ date and the alarm time, press ALARM (see “Using the Alarm”).
To view the time in another time zone, press ZONE until the desired time zone appears.
USING THE ALARM
Setting the Alarm Time
1.Hold down ALARM until the alarm hour digits flash.
2.Repeatedly press (or hold down) 8 to advance the hour digits.
Notes:
•AM appears for an AM time and PM appears for a PM time
• appears as soon as you press
8.
3.Press ALARM. The minute digits flash.
4.Repeatedly press 8 to advance the minute digits.
5.Press ALARM to store the setting. The alarm time remains displayed.
Notes:
•To switch between viewing the alarm time and the month/date, press ALARM.
•The alarm time does not need to be displayed for the alarm to sound.
Turning the Alarm On/Off
To turn on the alarm, press ON/OFF so appears.
At the set alarm time, flashes on the display and the alarm sounds one soft beep every 2 seconds. To silence the alarm, press ALARM. remains on the display and the alarm sounds at the set alarm time the next day.
If you do not silence the alarm, after 20 seconds, two quick beeps sound every 2 seconds and the volume increases slightly. After 20 more seconds, three quick beeps sound every 2 seconds and the volume increases to its maximum level. After another 20 seconds, the beeping becomes continuous (about four beeps per second) for about 1 minute.
After 2 minutes, the alarm turns off auto- matically. The first time this happens, the snooze feature activates and continues to flash. In about 8 minutes, the alarm sounds again. If the alarm turns off automatically a second time, remains on the display and the alarm will sound again at the set alarm time the next day.
To turn off the alarm, press ON/OFF so disappears.
7