PREPARATION
INSTALLING BATTERIES | Notes: |
Your clock requires two AA batteries (not supplied) for power. For the best operation and longest life, We recom- mend RadioShack alkaline batteries.
Cautions:
•Use only fresh batteries of the required size and type.
•Do not mix old and new batteries, different types of batteries (stan- dard, alkaline, or rechargeable), or rechargeable batteries of different capacities.
1.Pull the tab on the battery compart- ment cover at the back of the clock to remove the cover.
2.Place the batteries in the compart- ment as indicated by the polarity symbols (+ and
3.Replace the cover.
•When BATT flashes on the display, replace the batteries with fresh ones.
•If the clock does not operate after you install the batteries, remove them and wait about five seconds until the display clears. Then rein- stall the batteries.
As soon as you install the batteries, all display segments briefly appear. Then AM 12:00 and the seconds display ap- pear. 1M1D appears, indicating January 1, and the clock displays the current in- door temperature. To change the dis- play language, see “Manually Setting the Time, Date, and Language” on Page 6.
For about 2 minutes after you install the batteries, the clock scans for the radio signal while 
flashes.
3
