Turning Off Automatic Time Setting
ALARM 8 CLOCK ZONE
If you move to an area where the time- setting signal is unavailable, you can turn off automatic time setting. Hold down ZONE for about 3 seconds until disappears.
Manually Setting the Time, Date, and Language
When you turn off automatic time setting or if the clock does not receive a good radio signal, you can set the time and date manually.
Important: Good radio signal reception overrides the manual setting. If you do not want this to happen, turn off auto- matic time setting. (See “Turning Off Au- tomatic Time Setting.”)
Note: If you do not press a button for about 2 minutes, the clock returns to the current time display.
1.Repeatedly press ZONE to select the desired time zone.
2.Hold down CLOCK until the hour dig- its flash.
3.Repeatedly press (or hold down) 8 to advance the hour digits.
Note: AM appears for an AM time and PM appears for a PM time.
4.Press CLOCK. The minute digits flash.
5.Repeatedly press 8 to advance the minute digits.
6
ON/OFF
6.Press CLOCK. The year digits flash.
7.Repeatedly press 8 to advance the year setting.
8.Press CLOCK. The month digits flash.
9.Repeatedly press 8 to advance the month digits.
10.Press CLOCK. The date digits flash.
11.Repeatedly press 8 to advance the date digits.
12.Press CLOCK. A letter representing the language used for the day of the week flashes.
13.Repeatedly press 8 to select the desired language (E = English, F = French, S = Spanish).
14.Press CLOCK to store the setting. The time, month, and date appear.