●Connection with the PC
Connect the PC and the Master unit. (Refer to p. 48 for the connection procedure.)
●Software Setup
After connecting the PC to the Master unit, do the setup procedure with SETUP MENU or
•With SETUP MENU
1.Turn the power of each unit to ON.
2.
3.Open SETUP MENU. (Refer to p. 63.)
4.Open “700 SYSTEM” - “710
5.Set the connected Slave units to ON. “Is the MASTER- SLAVE changed? NO” will appear.
6.Change NO to YES by pressing the NEXT or PREV but- ton on the system controller.
7.Press the SET button. The setting will be saved and you will
•With WJ-SX150A Administrator Console
1.Turn the power of each unit to ON.
2.Open
3.Open the
4.Configure and save the settings by clicking on the Save Exit button. (Refer to p. 82.)
5.Open the “Put a file to SX150A” window. (Refer to p. 83.)
6.Click on the “OK” button. The setting data will be trans- ferred to the Master unit.
7.Close the main window (refer to p. 80) to quit WJ- SX150A Administrator Console.
●Recorder Setup
When connecting a recorder with more than one video input
55